Skip to content

Based in Angaston · Barossa, Adelaide Hills & Gawler

Facebook 0447 044 266

Aston Rural EnterprisesGet a free quote
Steel garden gate set into a post and rail fence

Custom steel gates

Driveway, farm and garden gates in steel, welded by Neil himself to the size of your opening, finished in hot-dip galvanising or powder-coat, and hung on site.

Steel garden gate set into a post and rail fence

Made by the person who hangs it

Neil welds his steel gates himself, to the size of your opening, then hangs them on site. One person is responsible for the gate from the first measurement to the last hinge, so odd widths, slopes and one-off designs are not a problem. Steel is also used alongside timber where it suits the job, and a lot of Neil's gates are still hardwood timber.

Finish options: hot-dip galvanised for farm and rural gates, or powder-coated in a colour to suit the house. Neil quotes, welds, finishes and hangs the gate himself.

Steel garden gate set into a post and rail fence
01

Steel garden and side gates

Steel garden gates and side gates set into a timber fence or wall, made to measure for the gap and finished to suit the house. Slim, strong and secure.

Ask Neil about a steel gate
Swing gate motor arm on a steel post
02

Steel driveway gates and motor posts

Steel suits wide driveways and gates that need a slim, strong frame. Powder-coat them to match the house or galvanise them for a rural entrance, and add a motor from the start if you want one. Steel posts are a solid mount for a gate motor.

Ask Neil about a steel gate

Steel farm gates

Steel farm gates are welded to the width of the opening and hot-dip galvanised so they stand up to stock and weather. Neil hangs them on site, or you can collect them ready to install. For the rural side of things see farm gates.

Galvanised or powder-coated?

Hot-dip galvanising coats the steel in zinc and suits farm and rural gates that live outside in all weather. Powder-coat gives a colour finish for gates in town, to match the house or the fence. Our guide to timber vs steel gates compares the two finishes and the upkeep.

Common questions

Does Neil weld steel gates himself?

Yes. Neil welds his steel gates himself, to the size of your opening, then hangs them on site. He also builds timber gates, and uses steel alongside timber where it suits the job.

Galvanised or powder-coated steel gate?

Hot-dip galvanised suits farm and rural gates that live outside in all weather. Powder-coat gives a colour finish to match a house or fence in town.

Can a steel gate be automated?

Yes. Neil fits swing and sliding gate motors, with keypads and remotes, to new steel gates or ones you already have. See automatic gates.

Can Neil make a steel gate to an odd size?

Yes. Every gate is made to the opening it is going in, including openings that are out of square or on a slope.

Where does Neil fit steel gates?

Around the Barossa Valley, the Adelaide Hills and Gawler, from his base in Angaston. He travels anything within about 1.5 to 2 hours.

Pair of curved-top timber farm gates with diagonal braces between large posts and matching post-and-rail fencing

Want a gate in steel?

Send Neil the opening size, a photo and the finish you are after. He will quote the gate, the finish and the hanging.

Call Neil Free quote