Skip to content

Based in Angaston · Barossa, Adelaide Hills & Gawler

Facebook0447 044 266

Aston RuralEnterprisesGet a free quote
The same driveway with the gates hung and motors fitted

Gate automation

Swing or sliding motors, keypads, remotes and intercoms fitted to new or existing gates around the Barossa and the Hills, so the gate opens without you getting out.

The same driveway with the gates hung and motors fitted

Automation Neil fits

A motor can go on a gate Neil builds, or on one you already have.

Mains or solar power, whichever suits the spot. Once it's in, Neil sets it up, tests it and shows you how to use it.

Swing motor on a timber driveway gate
01

Gate motors

Swing and sliding gate motors, on new gates Neil builds or retrofitted to a gate you already have.

Run them off mains power, or go solar if the gate is a long way from the house. Neil sets it all up, tests it and shows you how to use it before he leaves.

Ask Neil about automation
Swing motor fitted to a timber gate
Motor arm mounted on a timber gate post
Motor arm on a timber gate
Swing gate motor arm on a steel post
Timber gate with a motor and control box fitted
Keypad on a pointed timber post at the gate
02

Keypads & remotes

A keypad on its own post at the gate, plus remotes, so you can open up without getting out of the car.

Intercoms and safety sensors can be added too, so you control who comes through, from the car or from the house.

Ask Neil about automation
Keypad on a capped timber post
Keypad post beside a motorised gate
Keypad post with the control box below
Keypad fitted to a timber gate post
Control box mounted on the fence
03

Control boxes & wiring

The control box goes on the fence or on its own post near the gate, with the wiring run neatly to the motors.

Ask Neil about automation
Control box and wiring on a gate post
Control box on its own post

Common questions

Can Neil automate a gate I already have?

Yes. Swing and sliding gate motors can be retrofitted to an existing gate, or fitted to a new gate Neil builds.

What if there is no power at the gate?

Go solar. Motors can run off mains power, or off solar if the gate is a long way from the house.

How do I open an automatic gate?

A keypad on its own post at the gate, plus remotes, so you can open up without getting out of the car. Intercoms and safety sensors can be added too.

Will Neil show me how it works?

Yes. Once it is in, Neil sets it up, tests it and shows you how to use it before he leaves.

Where does Neil fit gate motors?

Around the Barossa Valley, the Adelaide Hills and Gawler, from his base in Angaston. Towns include Tanunda, Lyndoch and Mount Pleasant. He travels anything within about 1.5 to 2 hours.

Can I get the gate built and automated in one job?

Yes. Neil builds custom gates and fencing as well, so a new entrance can go in as one job with the motor and keypad included.

Want your gate automated?

Tell Neil about the gate and the driveway, new build or existing, and he'll quote the automation to suit.

Call NeilFree quote