
Timber entrance gates & frames
Entrance pairs, overhead frames and post and rail wings for the end of your drive, built in hardwood by Neil in Angaston and hung on site, ready for a motor if you want one.
Overhead timber entrance frame over double farm gates
The first thing people see
A property entrance is a few parts working together: the posts, the gates, the wings either side and, on a lot of rural blocks, an overhead frame. Neil builds all of it as one job, so the timber, the finish and the lines match. Timber entrances are at the top of the list of work Neil wants to do.
Mostly hardwood, with spotted gum Neil's go-to, oiled to protect it. Painted or dark-stained finishes work too, and steel goes in where it suits, welded by Neil himself.
Entrance pairs
A pair of gates sized to your opening, often in spotted gum with Neil's curved top rail, the Welsh-style look that suits a farm or acreage drive.
The bracing is laid out so the gates hold their shape, and they are hung to swing true and meet properly in the middle.
Ask Neil about an entranceOverhead entrance frames
A tall timber frame over the gates turns a driveway into a proper property entrance. Neil builds the frame and the gates together, left natural, oiled or stained dark.
Tell Neil what comes through the entrance (trucks, floats, machinery) and he builds the frame to clear it.
Ask Neil about an entranceWings, posts and a gate for walking through
Post and rail wings either side tie the entrance into the fence line, built from the same timber as the gates. A matching pedestrian gate beside the main pair can go in at the same time, so people on foot never have to open the big gates.
Ask Neil about an entranceReady for a motor
A lot of entrances end up automated. Neil plans for it from the start: posts that can carry a motor, a spot for the keypad post and a run for the wiring.
Ask Neil about an entranceRelated work Neil does
Common questions
Who builds timber entrance gates in the Barossa?
Aston Rural Enterprises. Neil, based in Angaston, builds timber entrance gates, overhead entrance frames and post and rail wings to fit your driveway, mostly in hardwood (spotted gum is his go-to), and hangs them himself across the Barossa Valley, the Adelaide Hills and Gawler.
What is a Welsh-style gate?
A timber gate with a curved top rail and diagonal bracing, a classic look on farm and acreage entrances. Neil builds them in spotted gum, often as a pair, and oils the timber to protect it.
Can an entrance be automated later?
Yes. Neil can set the posts and gates up for a motor from the start, so a swing motor, keypad post and remotes can go on now or later. See automatic gates.
How wide should a rural entrance be?
Wide enough for the biggest thing that uses the drive (a truck, a horse float, a tractor) with room to turn in off the road. Measure what comes through and Neil sizes the gates and frame to suit. Our guide to choosing a farm gate covers widths in more detail.
Can I get a matching pedestrian gate?
Yes. A walk-through gate beside the main pair can be built in the same timber and finish and go in as part of the same job.
What does Neil need to quote an entrance?
A photo of the spot, the opening width if you have it, what comes through the entrance, and whether there is power near the gate. Quotes are free.
For design ideas, read our guide to rural entrance gates.

Planning a new entrance?
Send Neil a photo of the spot and the width of the drive. He will talk through gates, frame, wings and a motor, and the quote is free.
