Skip to content

Based in Angaston · Barossa, Adelaide Hills & Gawler

Facebook 0447 044 266

Aston Rural EnterprisesGet a free quote
Keypad on a timber post beside a motorised timber gate

Gate keypads, remotes and intercoms: choosing how your gate opens

By Aston Rural Enterprises ·

The motor moves the gate. The keypad, remotes and intercom decide who gets through, and how easily.

Keypad on a timber post beside a motorised timber gate

Most automatic gates on rural properties use two ways in: remotes for the people who live there, and a keypad on a post at the gate for visitors, family and trades. An intercom adds a way for someone at the gate to reach you at the house, so you decide who comes through. Safety sensors sit alongside all of it. The right mix depends on who uses the gate, how far it is from the house, and whether it runs on mains or solar.

Remotes

A remote is the everyday way in. Press the button as you come up the driveway and the gate is opening by the time you get there. Each person who uses the gate regularly gets one, and a spare is worth keeping in the house.

Things to ask about remotes:

  • How many come with the motor, and whether more can be added later.
  • How to remove one from the system if it is lost.
  • Whether the range reaches as far down the driveway as you want to press it.

Keypads

A keypad lets people open the gate with a code instead of a remote. It is handy for visitors, family who come and go, a shearer or a delivery driver, and for you on the day you leave the remote in the other car. Neil puts the keypad on its own post at the gate, so you can reach it without getting out of the car.

Keypad on a pointed timber post at the gate

Where the keypad post goes matters more than people expect:

  • On the driver’s side as you come in, at a height you can reach from the window of a car or a ute.
  • Far enough back from the gate that a car or a trailer is clear of the swinging leaves, and ideally clear of the road while it waits.
  • On a solid post that will not get clipped by a trailer or machinery coming through.

Give out codes sparingly, and change them if too many people end up with one.

Intercoms

An intercom lets someone at the gate call through to you, so you can talk to them and open the gate for them without walking down the driveway. On a long rural drive, or when the house cannot see the gate, that is the main reason to have one. Intercoms can be added to an automatic gate alongside the keypad and remotes, so you control who comes through, from the car or from the house. Ask Neil which options suit your motor and how far the gate is from the house.

Safety sensors

Whatever opens the gate, an automatic gate can trap a person, a child, a dog or stock between the moving gate and a post, wall or the ground. Safety sensors, such as beams across the opening that stop the gate if something is in the way, can be added to the system. Correct force settings with automatic reversal, and a manual release you know how to use, matter just as much. WorkSafe New Zealand’s automated gates safety alert recommends controls such as warning signs, a buzzer or flashing light, a pressure-sensitive edge, force limiting with automatic reversal, and an accessible manual release. In Australia, electric gate drives are covered by AS/NZS 60335.2.103. Our sliding vs swing gate guide explains where the trap points are on each type.

Power: mains or solar

Keypads, receivers and intercoms all draw a little power around the clock, not just when the gate moves. On mains that is easy. On solar, those small loads need to be counted when the panel and battery are sized, or a run of short winter days can leave the gate flat. Our guide to solar gate openers covers sizing a system for a Barossa winter. Neil fits gate motors, including solar motors for gates a long way from the house.

Control box and wiring

The control box holds the controller and receiver. Neil mounts it on the fence or on its own post near the gate, with the wiring run neatly to the motors. Keeping it tidy and weatherproof makes it easier to look after later.

Control box and wiring on a gate post

Setting it up

Neil fits swing and sliding gate motors to gates he builds and to gates you already have, with a keypad on its own post and remotes. Once it is in, he sets it up, tests it and shows you how to use it before he leaves, including the manual release. He works across the Barossa Valley, the Adelaide Hills and Gawler from his base in Angaston. See gate automation, or send Neil a photo of the gate for a free quote.

Common questions

Can a keypad be added to an automatic gate?

Yes. Neil puts the keypad on its own post at the gate, alongside the remotes, so you can open the gate with a code without getting out of the car.

Where should a gate keypad post go?

On the driver's side as you come in, at a height you can reach from a car or ute window, far enough back that the car is clear of the gate as it opens, and on a solid post that machinery will not clip.

Can I add an intercom to my gate?

Intercoms and safety sensors can be added to an automatic gate, so you can control who comes through from the car or from the house. Ask Neil which options suit your motor.

Does a solar gate need a bigger battery for a keypad or intercom?

Those devices draw power around the clock, so they need to be counted when the solar panel and battery are sized, especially for short winter days.

Want a price for your job? Call Neil on 0447 044 266 or send a photo through the quote form.

More guides

All guides

Timber farm gate with an automatic opener arm and control box on the gate post, gravel driveway and paddocks behind

Want your gate to open from the car?

Send Neil a photo of the gate and tell him how far it is from the house. Quotes are free.

Call Neil Free quote