Skip to content

Based in Angaston · Barossa, Adelaide Hills & Gawler

Facebook 0447 044 266

Aston Rural EnterprisesGet a free quote
Welsh-style curved-top spotted gum entrance gates hung in a stone entrance

Timber or steel gates: which suits your property?

By Aston Rural Enterprises ·

Where each one works best, what upkeep to expect, and what changes if the gate will have a motor.

Welsh-style curved-top spotted gum entrance gates hung in a stone entrance

Timber suits the entrance people see and gates that match post and rail. Steel suits gates that take knocks, need to stay light for their width, or should match a modern house in a powder-coated colour. Most of what Neil builds is hardwood timber, with spotted gum his go-to, and he uses steel where it suits the job, hot-dip galvanised or powder-coated. The right choice comes down to where the gate sits, how wide it is, whether it will have a motor, and how much upkeep you want.

Timber gates

A timber gate is built to the opening, in any design: braced farm gates, entrance pairs with a curved top rail, arbour gates, side gates. It ties in with timber post and rail, so the whole entrance reads as one piece.

Hardwood is heavy and hard-wearing. Spotted gum, for example, is listed by the timber industry's WoodSolutions as termite resistant, with a seasoned density of around 990 kilograms per cubic metre (WoodSolutions, spotted gum). That weight is part of why a well-built timber gate feels solid, and also why it needs a strong hanging post and correct bracing.

Upkeep: timber moves with the weather and greys off in the sun. Oiling protects it and keeps the colour. Neil oiled the Welsh-style spotted gum entrance gates pictured above to protect the timber.

Double driveway gates with a curved top rail

Steel gates

Steel gates are lighter for their width, which helps on long paddock gates and anywhere a gate gets bumped by stock or machinery. They come in two common finishes:

  • Hot-dip galvanised: the steel is dipped in molten zinc, which coats it inside and out. It is the usual choice for gates out in the paddock.
  • Powder-coated: a baked-on colour finish, good for garden and side gates where the gate should match the house or fence.
Steel garden gate set into a timber post and rail fence

Side by side

TimberSteel
LooksWarm, traditional, matches post and railClean lines, colour-matched with powder coat
WeightHeavier, needs solid posts and bracingLighter for the same width
UpkeepOil to protect the timberLow once galvanised or coated
Best forEntrances, driveways, gardens, farm gates with post and railPaddocks, laneways, modern homes, gates that take knocks

Where each one works

  • Entrance and driveway: usually timber, often as a pair. Neil's entrance pairs often have his curved top rail.
  • Paddock and laneway: galvanised steel or braced timber, depending on looks, width and how much of a beating it takes.
  • Garden and side gates: timber, or powder-coated steel to match the house, made to measure for the gap you have.
  • Odd openings: either, built to fit. A made-to-measure gate fits the opening, instead of the opening being changed to fit a stock size.

If the gate will have a motor

Both timber and steel gates can be automated. What matters is weight and wind. Every gate motor is rated for a maximum gate length and weight, and a solid gate catches the wind, which makes the motor work harder. Open rails catch less. If a motor is likely, say so before the gate is built so the posts and gate are set up for it. See gate automation and how solar gate openers work.

Gates built in Angaston

Neil builds farm and rural, entrance and driveway, and residential and garden gates, plus one-off designs, from his base in Angaston, for properties around the Barossa Valley, Tanunda, Nuriootpa, the Adelaide Hills and Gawler. See custom gates.

Common questions

Are timber gates hard to look after?

Not really. Timber moves with the weather and greys in the sun; oiling protects it and keeps the colour. Hardwood like spotted gum is dense and hard-wearing.

What timber does Neil use for gates?

Mostly hardwood. Spotted gum is Neil's go-to, oiled to protect it. Steel goes in where it suits the job.

Can a steel gate match my house?

Yes. Steel gates can be powder-coated in a colour to suit the house or fence, or hot-dip galvanised for paddock use.

Can a timber gate be automated?

Yes. The motor has to be rated for the gate length and weight, and solid infill catches more wind than open rails. Tell Neil before the gate is built if a motor is likely.

Want a price for your job? Call Neil on 0447 044 266 or send a photo through the quote form.

More guides

All guides

Pair of curved-top timber farm gates with diagonal braces between large posts and matching post-and-rail fencing

Got a gate in mind?

Send Neil the opening width and a photo or sketch. Timber or steel, he will build it to fit. Quotes are free.

Call Neil Free quote